Built by hand
Every piece is built in-house, start to finish. No flat packs, no cam locks, no shortcuts — just careful, unhurried work at the bench with hand tools and time-tested joinery.
Handmade in Seoul · Seongsu-dong
Solid-wood furniture, homeware, and hand-cut joinery made at the bench in our Seongsu workshop — with small workshops open to anyone who wants to build something real with their hands.

Our story
Air-dried hardwood, hand-cut joinery and oil finishes rubbed in at the bench — furniture built to be handed down.
We opened this workshop in a quiet corner of Seongsu-dong because we wanted a place where furniture could be built without hurry. Every table, board, box, and bowl that leaves the studio has been worked by hand, from selecting the rough board at the timber yard to the final coat of oil rubbed in at the bench. Nothing here is flat-packed, nothing is held together with cam locks, and nothing leaves before the joints close cleanly.
The studio runs on a simple belief: building things with your hands is good for you. It slows you down, it teaches patience, and it leaves you with something honest at the end — a piece that can be handed down rather than thrown out. That's true whether you've been cutting dovetails for twenty years or you're picking up a chisel for the very first time. So alongside our own commissions, we keep the doors open for small workshops, because the shop feels most alive when it's full of people learning.
Everything you see in the gallery below was made in this room, on these benches, from timber we choose to age well over decades: air-dried walnut with a good weight in the hand, quartersawn white oak that shrugs off daily use, cherry that warms to a deep amber, and green ash turned wet on the lathe. Prices for finished pieces start around ₩120,000 for smaller homeware and rise with size, timber, and joinery — get in touch and we'll tell you what's currently available or what we can build to order.
Portfolio
Recent work off the bench — tables, boxes and turned bowls. Every board is picked for its grain, so no two pieces match.

Furniture
A solid black-walnut dining table on a hand-cut trestle base.

Homeware
An end-grain white-oak cutting board that stays kind to your knives.

Joinery
Hand-cut through-dovetails in cherry with a fitted lift-lid.

Turning
A wide serving bowl turned green from a single ash blank.
About the studio
An honest description of how we work. Replace this with your own story — how you started, what timber you love, and what visitors can expect.
Every piece is built in-house, start to finish. No flat packs, no cam locks, no shortcuts — just careful, unhurried work at the bench with hand tools and time-tested joinery.
Air-dried walnut, quartersawn oak, cherry, and ash, chosen to age well and feel good in the hand. We tell you exactly which board each piece was cut from.
Groups stay small — six to eight people — so everyone gets real time at the bench and plenty of one-to-one help sharpening, sawing, and fitting joints.
Drawbored mortises and hand-cut dovetails hold our furniture together, not glue and screws alone. Finishes are repairable at home, so a piece can outlive its owner.
Most of our workshops assume no experience at all. If you've never picked up a chisel or a hand plane, this is exactly where you should start.
Looking for something specific — a dining table, a set of shelves, a wedding gift box? Tell us the dimensions and the timber you have in mind and we'll build it.
Kind words
Kind words from clients who commissioned furniture and students who left with a hand-cut joint they're proud of.
I'd never touched a hand plane before and left the four-week course with a solid oak tray I use every single day. The teachers never once made me feel rushed.
The weekend cutting-board workshop was the calmest six hours I've had in months. Small group, beautiful timber, and I walked out with a board that's still perfect.
I commissioned a walnut dining table for our first home and it was even better in person. You can feel that every joint was cut by hand — it'll outlast us.
Visit
We're a short walk from Seongsu Station. Drop by during open hours to see pieces on the bench — no appointment needed.
48 Sawdust Lane
Seongsu-dong, Seongdong-gu
Seoul
5 min walk from Seongsu Station (Line 2), Exit 3.
Tue – Sat · 11:00 – 19:00
Sun – Mon · Closed
Workshop evenings run later — see the schedule.
02-1234-5678
hello@example.com
We usually reply within a day or two.
A typical week at the bench
Tue
Benches free for returning students to work on their own pieces.
Wed
Evening course — saw, chisel, and your first hand-cut dovetail.
Thu
Heads-down shop day; visitors welcome to watch from the gallery.
Fri
Oils, waxes, and lacquer — how a surface earns its glow.
Sat
One-day workshop; leave with a finished cutting board or stool.
Questions
No. Most of our beginner workshops assume no prior experience at all — we'll walk you through sharpening, sawing, and fitting joints from the ground up. If you're unsure which workshop suits you, just mention it in the inquiry and we'll point you in the right direction.
Reserve a spot in an upcoming workshop — beginners always welcome, and every tool you need is provided.